From the customer component to the approved work sequence
A CAD model alone is not sufficient for this: material, tolerances, surfaces, test requirements and number of pieces decide with which machining is useful. CNC Kalkulator merges this information per component revision. Missing or contradictory information is identified as open points, so that the work preparation can ask specifically for the customer, in production or in quality assurance.
After testing, an editable working sequence is created for pre-calculation. Work preparers select suitable machines, plan clamping and assign released tools and cutting data. cutting times, non-cutting times, set-up times and test expenses remain separately comprehensible. This makes it visible whether, for example, an additional clamping, an inaccessible contour or a narrow tolerance changes the effort. Only technically confirmed assumptions enter the released calculation level.
This creates a common basis for CNC pay-makers between work preparation, calculation and sales. Questions are asked earlier, variants for other quantities or machines can be separated cleanly and later processors can understand the chosen production route. This helps especially with changing requests, representations and repeat parts without replacing the decision-making competence of experienced specialists.
The work preparation process receives a structured, documented process: it recognizes what can be calculated, which assumptions apply and where further technical clarification remains necessary. Free-form surfaces, complex 5-axis strategies, special clamping devices and special tools are then secured in detail in CAM, collision check and production planning. The quality of the pre-calculation grows with a clearly defined part range and maintained operating data.
In Pro, the app plans stock blanks, tensioning and operations from drawing and STEP model with your released machines and tools fully automatically as a calculation design; clamping, tools and cutting values remain changeable, and the calculation is immediately recalculated. More information under Full automatic calculation from drawing and CAD.
Clear handover before production
Clear handovers reduce tuning effort and prevent open points from becoming noticeable on the machine.
Checking requirements
Geometry, material, tolerances and surfaces are considered together per component revision.
Preparing production
Machine, clamping, tools and operations remain technically editable for AV.
Release Assumptions
Open points and manual corrections are visible before they are included in the calculation.


