Calculate energy costs per component: current of a CNC machine per piece

State:
AI-generated

The energy costs result from power consumption times time times electricity price. The calculator separates the cutting phase from the side-time with base load and shows the costs per piece, for the annual quantity and as a share per machine hour.

Formulas

E = P × t ÷ 60

Energy per piece

Power in kW times time in minutes divided by 60 equals kilowatt hours.

E_gesamt = P_Schnitt × t_Schnitt + P_Grundlast × t_Neben

Cut and side time separated

The base load runs even if it is not cut.

Kosten = E × Strompreis

Cost per unit

With the actual working price including surcharges.

Milling part with 24 minutes machining and 6 minutes side time

12 kW average consumption, 4 kW base load, electricity price 0.34 €/kWh, 1,200 units per year.

  1. Energy on average = 12 × 24 + 604,80 kWh
  2. Energy in the secondary time = 4 × 6 ÷ 600,40 kWh
  3. Total energy per unit5.20 kWh
  4. Cost per piece = 5.20 × 0.341,77 €
  5. Cost for 1,200 pieces per year2.121,60 €
  6. Proportion of hourly rate at 24 min runtime4,42 €/h

ResultAbout 1.77 € Energy costs per component – about 4.42 €/h Machine life.

At an hourly rate of 72 €/h, this corresponds to around 6 percent. The basic load here represents only 8 percent of the consumption – with small lots with a lot of set-up time, this proportion increases significantly.

Energy is a small but visible post

In the calculation example of the machine hourly rate, the energy accounts for €3.75 out of €33.62 per machine hour, with the operator accounting for an even smaller part. The visible tracking still helps - when making investment decisions, when evaluating idle times and when customers ask about the CO₂ balance sheet.

Questions and answers

How do you calculate the energy costs per component?

Power consumption in kilowatts times time in hours results in the amount of energy in kilowatt hours, multiplied by the electricity price the costs. Important is the separation of cutting phase and side time: During the side-time the base load continues from control, cooling, hydraulics and chip conveyors.

What power consumption do you start?

Not the rated power of the spindle, but the average actual recording on average – typically 30 to 60 percent of the rated power. The value becomes loadable only by measuring the connection of the machine via a real job.

How large is the share of energy in machine costs?

At an hourly rate of 60 to 90 €/h, the pure energy content depends on the machine and the electricity price is usually 3 to 8 percent. It is therefore not a main driver, but large enough to be visibly guided in investment and utilization decisions.

Why consider the base load separately?

Because it is independent of the machining process. A machine that is in idle mode or during setup time continues to consume. This is exactly where the greatest potential for savings lies – not in optimizing the cutting performance.

Are there energy costs in the machine hourly rate?

Yes, they are part of the variable cost per hour. The machine hourly rate calculator performs them as its own position from power consumption and electricity price. Do not use them twice: either in hourly rate or as separate position.

Energy costs in the CNC Calculator app

Evaluates the operating, idle and basic consumption of a production order.

Free energy cost calculator in CNC Kalkulator with input and result
Calculate in the app

Free tools in your browser without sign-in

How "Energy costs" with geometry, drawing requirements and your cost rates become an offer, we gladly clarify in person: Book free first interview.

Carlo D'Este
D'Este Solutions

Welcome to the CNC Calculator

We will be happy to help you with any questions regarding the app, pro or your calculation.

Questions? Call us!