Costs of material, production time and operational cost rates
The CNC cost calculation translates a plausible production plan into cost per part or order. For this purpose, material, machine and personnel time, tools, devices, external performance and testing effort are evaluated separately. It is crucial that time and cost have the same reference: machine life is part of the machine hourly rate, manual operating or testing time at a suitable personnel cost rate. This remains recognizable, which actually results in costs.
Simplified applies K_piece = K_material + K_production + K_foreign + K_one-time / N, where N denotes the planned number of good parts. If times are carried out in minutes and hourly rates in euros per hour, the production costs can be determined, for example, with t_machine · S_machine / 60 and t_personal · S_personnel / 60. With 24 minutes of machine time at 90 euros per hour, 36 euros of machine costs are incurred. If 9 euros of personnel, 18 euros of material, 6 euros of external performance and a one-time expenditure of 120 euros distributed over 20 parts, the example results in 69 euros of direct costs per part.
The direct costs are followed by the operationally defined overhead costs. Their surcharge base must be clear so that, for example, space, administration or sales costs are not already included in the machine hourly rate and are charged a second time. The sales price is then determined. Cover contribution, surcharge and margin denote different sizes: A surcharge of 20 percent on costs does not correspond to a margin of 20 percent on the selling price. The calculation logic used should therefore be defined uniformly in the company.
Uncertainties are shown as such, including fluctuating material prices, unclear test requirements, difficult to estimate tool life or unsold performance. A risk surcharge is understandable if the reason, amount and release are documented. Any calculation is also bound to revision, lot size, machine and date of validity. If one of these fundamentals changes, the affected cost blocks are specifically re-examined. This prevents outdated master data or unnoticed assumptions from becoming the price basis.
The complete calculation scheme from material to quotation price shows CNC parts to calculate. The page CNC Calculation Software describes the properties of a software for this calculation. In Pro, the CNC Calculator app automatically creates the cost calculation from drawing and STEP model as a calculation design, which you check and release; for more information, see Full automatic calculation from drawing and CAD.
Key points
Costs are explained in such a way that inputs, procedures, effects and limits in the CNC calculation remain comprehensible.
- Direct costs include: Machinery, personnel, materials, tools, testing effort and external services are assigned to their actual consumption.
- Distribute one-off expenditure: Equipment, programming and devices are transferred to the goods according to the offered lot size.
- Select price separately: Costs, risks and desired contribution to cover remain visible instead of disappearing into a lump sum.


