Offers for individual parts and series in contract production
A calculation in contract manufacturing is loadable if it translates the requested execution into a plausible production route and derives from it costs and selling price. CAD model, drawing and inquiry must describe the same drawing level; material and delivery condition, number of pieces or scale, date, provided services and test requirements belong to this. Missing information is not replaced by unnoticed standard values, but is carried out as a query or explicitly to be released.
From the request package to the work plan
The preliminary work plan is created from the complete request: stock, process, machine, number of clampings, tools and processing sequence. Tolerances, fit, surfaces and mould or position requirements can require additional levelling and testing steps. External services such as sawing, hardening, grinding or coating are in the process with price, duration and responsibility. Side parts change the scope: If the customer delivers the material or the prefabricated part, only the requested operations are calculated, with goods receipt and final inspection.
Example of calculation: Individual part and series in comparison
The same rotating part as under Calculation turned parts, this time with a heat treatment as foreign power: 0.80 € per piece, at least 150 € per application. Rod section Ø 40 × 62 mm made of steel to 2.40 €/kg, 90 minutes set-up, 4.3 minutes main and side time per piece, 72 €/h for machine and operator, 18 % overhead costs, 12 % margin from the selling price.
| Position | 20 pieces | 500 pieces |
|---|---|---|
| Material (strip) | 1,47 € | 1,47 € |
| Equip per piece (90 min × 72 €/h ÷ quantity) | 5,40 € | 0,22 € |
| Unit time (4.3 min × 72 €/h) | 5,16 € | 5,16 € |
| Other performance Hardening per piece | 7,50 € | 0,80 € |
| Manufacturing costs | 19,53 € | 7,64 € |
| General expenses 18 % | 3,52 € | 1,38 € |
| Cost of production | 23,04 € | 9,02 € |
| Price at 12 % margin | 26,19 € | 10,25 € |
For 20 pieces, the set-ups and the minimum amount of hardening make up about two thirds of the manufacturing costs; for 500 pieces, both hardly play a role. Example of calculation with round assumptions, no market prices; sums are made of unrounded values. The complete scheme up to the list price with discount and discount shows the page Offer calculation.
Typical errors in the supply calculation
- Setup and programming are included in a flat rate supplement. Then the price does not fall at a larger amount, and the item is offered too cheap.
- The margin is added to the cost of production rather than to the selling price. 12 % surcharge gives only about 10.7 % margin.
- In the case of small lots it is often greater than the unit price times quantity.
- batch prices are calculated from a price, or down, instead of calculating any quantity with their own set-up.
- Revision, material condition and assumptions are not documented. In case of a question or a new drawing revision, it is no longer possible to say what the price is based on.
- Overhead costs are charged twice, once per hour and once as a supplement.
Release and recalculate price
The offer price is generated from cost-effectiveness, documented risks and commercial objectives. A clear release shows not only the final sum, but also open assumptions and price-determining positions. After production, the target-actual comparison shows whether time models, master data or work plans have to be adjusted. Delivery capability, capacity, contract conditions and strategic price decisions remain tasks of the company.
In Pro, the CNC Calculator app creates the work plan with times, costs and scale from drawing and STEP model fully automatically as a calculation design, including the order scope for side parts; you check and release. Pro is unlocked on request. More information under Full automatic calculation from drawing and CAD.
Key points
Offers are explained in such a way that inputs, procedures, effects and limits in the CNC calculation remain comprehensible.
- Complete request: Revision, quantity, material, delivery status, date and test requirements are clarified before the calculation.
- Planning production: Machines, stresses, work steps and external services form the technical basis of the offer.
- Release price intelligible: Costs, risks and desired financial contribution remain visible separately and can be decided in a targeted manner.


