Rotational frequency, speed and rotational frequency
RPM and frequency describe the same size, the number of revolutions per unit of time, only with a different time unit. In manufacturing, the RPM n is given per minute, written as 1/min, U/min, min⁻¹ or rpm. The frequency f is given per second, in 1/s or Hertz.
A spindle with 3,000 1/min rotates 50 times per second, i.e. its rotation frequency is 50 Hz. The angular speed ω, on the other hand, counts the overstretched angle in the arc dimension: one revolution is 2π rad, 3,000 1/min is 314.16 rad/s.
f = n γ 60 · ω = 2π × f · T = 1 γ f
Calculate revolutions from number and time
If you count revolutions, you divide the number by the measured time. 50 revolutions in 20 seconds give 50 / 20 = 2.5 revolutions per second, i.e. 2.5 Hz or times 60 exactly 150 1/min.
If a sensor delivers several pulses per revolution, it is first divided by the pulses per revolution. A transmitter with assumed 4 pulses per revolution, which counts 200 pulses in 10 seconds, measures 200 ÷ 4 = 50 revolutions in 10 seconds, i.e. 5 Hz or 300 1/min.
n = N י t × 60 (N revolutions in t seconds)
Convert revolutions per minute to Hz and rad/s
The table calculates common speeds in rotational frequency, angular speed and orbital duration. 1,000 1/min correspond to 16.67 Hz, 104.72 rad/s and one revolution every 60 ms.
Conversion table revolutions per minute in Hz, wheel/s and operating time
Rotational frequency f = n = 60, angular speed ω = 2π × n = 60 and orbital time T = 60,000 n, rounded to two decimal places.
| Speed n (1/min) | Rotational frequency f (Hz) | Angular speed ω (rad/s) | Circulation time T (ms) |
|---|---|---|---|
| 60 | 1 | 6,28 | 1.000 |
| 100 | 1,67 | 10,47 | 600 |
| 500 | 8,33 | 52,36 | 120 |
| 1.000 | 16,67 | 104,72 | 60 |
| 1.500 | 25 | 157,08 | 40 |
| 3.000 | 50 | 314,16 | 20 |
| 6.000 | 100 | 628,32 | 10 |
| 10.000 | 166,67 | 1.047,20 | 6 |
| 24.000 | 400 | 2.513,27 | 2,5 |
The conversion is pure arithmetic and applies to any rotating shaft, spindle or disc.
Circumference speed from speed and diameter
With the diameter, the speed at the circumference is derived from the rotational speed: v = π × d × n ÷ 60,000 in m/s. A roller with a diameter of 100 mm at 600 1/min runs at 3.14 m/s, times 3.6, so 11.3 km/h. More examples and the reversal are on the page Calculate circumference speed.
In machining, the same size at the effective diameter means cutting speed and is expressed in m/min, i.e. v × 60.
v = π × d × n ÷ 60,000
Speed via belt and gear ratio
In a belt drive without slip, belt speed is the same at both pulleys, so rotational speeds are inversely proportional to diameters. If a motor at 1,450 rpm drives a 100 mm pulley and the driven pulley is 200 mm, the output turns at 1,450 × 100 ÷ 200 = 725 rpm.
For gears, use tooth counts in place of diameters. A pinion with 20 teeth at 1,450 rpm drives a gear with 60 teeth at 1,450 × 20 ÷ 60 = 483 rpm. These figures are worked examples.
n₂ = n₁ × d₁ ÷ d₂ · n₂ = n₁ × z₁ ÷ z₂
Synchronous speed and nominal speed of a three-phase motor
A three-phase motor's rotational field rotates with the synchronous speed n_s = 60 × f ÷ p, with the mains frequency f in Hz and the pole pair number p. On the 50-Hz network, this is 3,000 1/min for p = 1 and 1,500 1/min for p = 2.
An induction motor runs below synchronous speed. Slip accounts for the slightly lower rated speed on the nameplate. With angular velocity, torque is M = P ÷ ω. In this example, a 5.5 kW motor at 1,450 rpm delivers 5,500 ÷ 151.84 = 36.2 Nm. See the guide to cutting power for power and torque at the spindle.
n_s = 60 × f ו p · M = P ω ω
Questions and answers
What's the rotational frequency?
The number of rotations per second, expressed in 1/s or Hertz. It is the same size as the speed indicated in the production per minute.
How to convert 1/min to Hz?
By 60 splits: f = n ÷ 60. 3,000 1/min correspond to 50 Hz, 1,000 1/min 16.67 Hz. Conversely, Hz times 60 results in rotational speed in 1/min.
How many wheel/s are 1,000 revolutions per minute?
ω = 2π × 1.000 γ 60 = 104.72 rad/s. One revolution corresponds to 2π rad, therefore the rotational frequency in Hz is multiplied by 2π.
What is the difference between speed and rotational frequency?
Only the time unit. RPM and revolutions per minute are the same, n in 1/min, also written as U/min, min⁻¹ or rpm. The rotational frequency is given in 1/s or Hertz; the RPM in 1/min is the 60 times the rotational frequency in Hz.
How to calculate revolutions per minute from one measurement?
Divide the number of revolutions through the measuring time into seconds and multiply with 60. 50 revolutions in 20 seconds result in 150 1/min. In the case of an impulse encoder, the pulses per revolution are divided beforehand.


