One inch corresponds to exactly 25.4 mm, 1 sfm is 0.3048 m/min and 1 ipm is 25.4 mm/min. The unit calculator of the app keeps metric and imperial value synchronous: If you type in one of the two fields, the other one is immediately adjusted.
Formulas
1 Zoll = 25,4 mmLength
Exact definition also applies to ipm and ipr.
1 sfm = 0,3048 m/minCutting speed
Surface feet per minute in meters per minute.
1 lb = 0,45359 kgMass
For stock blanks and shipping weights.
°F = °C × 9 ÷ 5 + 32Temperature
For heat treatment and test data.
Common conversions in machining
The values that are regularly used in Anglo-Saxon drawings and tool catalogues.
| Size | Imperial | Metric | Factor |
|---|---|---|---|
| Length | 1 Customs | 25,4 mm | × 25,4 |
| Length | 1/2-inch | 12.7 mm | × 25,4 |
| Length | 1/4 inch | 6.35 mm | × 25,4 |
| Cutting speed | 1 sfm | 0,3048 m/min | × 0,3048 |
| Cutting speed | 500 sfm | 152.4 m/min | × 0,3048 |
| Feed | 1 ipm | 25,4 mm/min | × 25,4 |
| Feed per revolution | 0.006 ipr | 0,152 mm/U | × 25,4 |
| Mass | 1 lb | 0,4536 kg | × 0,45359 |
| Force | 1 lf | 4,448 N | × 4,4482 |
| Torque | 1 lbf | 1,356 Nm | × 1,3558 |
| Pressure | 1 psi | 0,0689 bar | × 0,068948 |
In the case of drawing dimensions, the tolerance is always also part of the conversion – the decimal places of a customs dimension bear their own meaning.
Speed, rotational frequency and angular speed
Speeds in 1/min, U/min or rpm are the same unit. In Hertz and rad/s, the page calculates speed to convert Hz and rad/s, the speed at the circumference to m/s and km/h the page Calculate circumference speed.
Converting is not the same as taking over
A converted measure continues to bear the tolerance logic of the initial drawing. For the production, the measurement, tolerance and reference must be assessed together and the conversion must be released documented.
Questions and answers
How do you calculate inches in millimeters?
One inch corresponds to exactly 25.4 millimeters. A half inch is 12.7 mm, a quarter inch 6.35 mm. The definition has been precisely defined since 1959, it is not a rounded value.
What does sfm mean for editing data?
Surface Feet per minute is the Anglo-Saxon unit of cutting speed. It is 1 m/min = 3.281 sfm or 1 sfm = 0.3048 m/min. A recommendation of 500 sfm therefore corresponds to approximately 152 m/min.
How to convert ipm and ipr?
Inches per minute (ipm) is the feed speed, inches per revolution (ipr) the feed per revolution. Both are converted with 25,4 in mm/min or mm/U: 0,006 ipr correspond to 0,152 mm/U.
What do you have to pay attention to when drawing in inches?
To the tolerance indication. A dimension with three decimal places (.500) means in Anglo-Saxon practice a narrower tolerance than two digits (.50). If only the measurement is converted, but the tolerance logic is not read, a false production effort arises.
Should converted dimensions be produced directly?
Only with documented conversion and release. Circulation errors sum up into dimensional chains, and the responsibility for the conversion lies with the finisher if it is not confirmed in writing by the customer.


