Calculate sawing time: cross section and cutting performance

State:
AI-generated

Enter cut area and cut performance

For a rectangle, A = width × height, for round material A = π × d² ÷ 4. These two areas are determined by the calculator from the entered dimensions. For pipes and other cross sections, select "Own material area" and enter the previously calculated material area in mm². For a pipe, this is the outer circular area minus the inner one. For time calculations, the calculator divides the entered area in mm² by 100 to obtain cm².

You enter the cutting performance from your own measured values or suitable released data. It is not a belt speed and not a universal value for a material. In the case of pipes and profiles, it must fit the changed operating conditions.

t_cut = A in cm² ÷ Q_A in cm²/min

Example for ten rectangular cuts

A cross-section of 100 × 50 mm results in 5,000 mm² or 50 cm². With assumed 20 cm²/min, a cut takes 2.5 minutes. Ten cuts result in 25 minutes of pure cutting time.

Half a minute of handling per cut and ten minutes of setting up add 5 and 10 minutes. The result is 40 minutes for the lot. The entered area power is a calculation example and must be replaced for your own process.

t_Los = cuts × (t_cut + t_handling) + t_shape

From cut to required length of rod

The cutting time alone does not say anything about the material consumption. Cutting joint, finished length, plan dimensions and unused remaining length determine the required quantity of rods.

Limits of the time model

The calculation uses a constant average cutting power. Interruptions, belt changes, bundle cuts and alternating cross-sections are only recorded if they are included in the measured values or additional times. The time estimate does not replace the release of machine, belt and voltage.

Questions and answers

What is the difference between cutting speed and cutting performance?

Cutting speed describes the movement of the cutting edge in m/min. The cut performance required here describes separate cross-sectional area in cm²/min. Both sizes are not interchangeable without further process information.

Can I use the values for pipes?

Yes, by selecting "own material surface". Determine the ring surface from outer and inner diameters and enter it in mm². The cutting performance must apply to tube and intervention conditions; a measurement value of full material can be unsuitable.

Sawing time in the CNC Calculator app

Calculates cutting and lot time from the material cross section surface and your measured cutting performance.

Calculation of sawing time free of charge in the CNC Kalkulator with input and result
Calculate in the app

Free tools in your browser without sign-in

How the calculation from drawing, CAD model and your operating data looks like with you, we will gladly clarify on one of your parts: Book free first interview.

Carlo D'Este
D'Este Solutions

Welcome to the CNC Calculator

We will be happy to help you with any questions regarding the app, pro or your calculation.

Questions? Call us!