Calculate thread: core hole, flank diameter and threaded holes

State:
AI-generated

M24 needs a core hole of 21 mm, M8 one of 6.8 mm: For metric control threads, the core hole is approximate nominal diameter minus slope, rounded to usual drill diameters according to DIN 336. For shaped threads it is larger, benchmark value d − 0.5 × P. The computer of the app shows the core hole with desired carrying depth, speed and feed of the thread drill.

Formulas

Kernloch ≈ d − P

Faust formula for standard thread

Nominal diameter minus incline. The standard table rounds to common drill diameters.

Kernloch = d − T × 1,0825 × P

Core hole from the carrying depth

T is the desired thread bearing depth. 1,0825 × P corresponds to the full threading height.

Kernloch ≈ d − 0,5 × P

Core hole for threaded forms

The app's guide value for shaped threads; the key is the tool's data sheet.

n = (vc × 1000) ÷ (π × d)

Speed of the threaded drill

Applies as with any rotating tool, with significantly smaller cutting speeds.

vf = n × P

Feeding during threading

The feed is determined by the slope and not freely selectable.

Corehole table

Corehole table M3 to M24 for cutting and forming

Core hole for threaded drills according to DIN 336, standard value for threaded forms according to d − 0.5 × P, through hole in series medium according to ISO 273 and speed of the threaded drill at vc 15 m/min. All dimensions in mm.

Corehole table M3 to M24 for cutting and forming
ThreadsRising PCore hole cuttingCorehole shapes (indicative)Medium throughholeSpeed at vc 15 m/min
M30,52,52,753,4ᐅ 1,592 1/min
M40,73,33,654,5⇩ 1,194 1/min
M50,84,24,65,5955 1/min
M61,05,05,56,6796 1/min
M81,256,87,3759,0597 1/min
M101,58,59,2511,0477 1/min
M121,7510,211,12513,5398 1/min
M142,012,013,015,5341 1/min
M162,014,015,017,5298 1/min
M202,517,518,7522,0239 1/min
M243,021,022,526,0199 1/min

For threaded forms, the data sheet of the tool sets the core hole; the benchmark is used for precalculation. For fine threads, the core hole also changes with the slope.

Thread dimensions

Calculate thread dimensions from diameter and slope

Each metric ISO thread is fully described by the nominal diameter d and pitch P. The flank diameter d₂, the core diameter D₁ of the nut thread and the core diameter d₃ of the screw are fixed multiples of the pitch, subtracted from the nominal diameter. For M8 × 1.25, d₂ = 7.188 mm, D₁ = 6.647 mm and d₃ = 6.466 mm result.

d₂ = d − 0.6495 × P D₁ = d − 1.0825 × P d₃ = d − 1.2269 × P

These are basic dimensions without tolerance. Limit dimensions according to a tolerance class such as 6H for the nut or 6g for the bolt thread are not calculated by the app; this is the thread tolerance standard. All values M3 to M24 in the thread table, incline and voltage cross-section per size.

Threads are time positions, no secondary issue

Centring, drilling, sinking, threading and deburring sum up. In the case of components with many threads, this proportion often decides more about the cycle time per part than the contour processing.

Questions and answers

Which core hole needs M24?

M24 has a standard thread of 3 mm incline; the core hole for a cut thread is 21 mm (24 – 3). For a shaped thread, the app calculates the benchmark d − 0.5 × P, i.e. 22.5 mm; the final hole determines the shaper's data sheet.

How to calculate the core hole diameter?

For metric ISO standard thread, the core hole formula = nominal diameter − incline. M8 with 1.25 mm incline results in 6.75 mm, the standard bore according to DIN 336 is 6.8 mm. The core hole can be calculated precisely via the desired thread bearing depth: d − carrying depth × 1.0825 × P.

Which core hole needs M3, M6, M8, M10, M12 and M24?

M3 (P 0.5) requires 2.5 mm, M6 (P 1.0) 5.0 mm, M8 (P 1.25) 6.8 mm, M10 (P 1.5) 8.5 mm, M12 (P 1.75) 10.2 mm and M24 (P 3.0) 21.0 mm. These values apply to cut rule threads and common thread drills according to DIN 336; for shaped threads the core hole is larger. The core hole calculator of the app calculates both cases.

Why not aim for 100 percent threaded carrying depth?

Between 60 and 75 per cent of the carrying depth is already achieved, while cutting torque, tool load and breakage risk of the threaded drill are significantly reduced. A higher carrying depth costs service life without making the connection significantly firmer.

How do you calculate the speed for the threaded drill?

As with any rotating tool, n = (vc × 1000) is applied γ (π × d). Usual cutting speeds for HSS thread drills are between 5 and 15 m/min in steel and for solid carbide are significantly higher. The feed is not freely selectable when threading: vf = n × incline.

What is important for the calculation of threads?

Each thread generates several working steps: centering or drilling, drilling the core hole, sinking, threading and deburring. For many threads per component, this is often the largest time position – clearly before the actual material removal of contour processing.

Threading, threading or threading?

Thread drilling is fast and easy, but the tool can break in the bore. Thread milling is process-proof, allows dimensional correction and makes sense for difficult-to-machine materials or expensive components. Thread shapes produce a more solid thread without any chip, but requires a larger core hole and ductile material.

Core hole diameter in the CNC Calculator app

Calculates the core hole direction value for cut and shaped metric threads.

Free core hole calculator in CNC Kalkulator with input and result
Calculate in the app

Free tools in your browser without sign-in

How "Corehole diameters" with geometry, drawing requirements and your cost rates become an offer, we are happy to clarify in person: Book free first interview.

Carlo D'Este
D'Este Solutions

Welcome to the CNC Calculator

We will be happy to help you with any questions regarding the app, pro or your calculation.

Questions? Call us!