CNC data transfer: CAD model, drawing and order data

State:
AI-generated

Data transfer with source for each indication

CNC data transfer: CAD data in the calculation or NC programs to the machine

CNC data transfer is understood to mean two different tasks. In the workshop, DNC is often meant: Finished NC programs are transferred between the programming place and machine control, machine data is reported back. In order preparation, however, the data before this is concerned: CAD model, technical drawing and request should be read once and taken over without typing into calculation, work plan and later ERP.

CNC Kalkulator is part of the second task. It takes over model, drawing and request in calculation and work plan and can optionally prepare a designated CNC program design for professional further processing. It transmits nothing on machine controls; DNC system, CAM and operational approvals remain responsible for this.

Where does the information come from?

A clean take-over determines where each indication comes from. Inconsistencies between model and drawing become visible instead of hiding in a single number.

Source Information Test
CAD model (STEP, STL) External dimensions, volume, surface, holes, pockets, turning diameter Unit, scale, revision, simplified geometry
Technical drawing (PDF) Material, tolerances, fits, threads, surfaces, heat treatment, test instructions Readability, drawing level, contradiction to the model
Request Quantity, date, scope of service, terms of delivery Completeness, assignment to part and revision
Master data of the holding Machines, hourly rates, material prices, specifications Validity and status of the data

The same applies to information that is only available on the drawing, such as heat treatment, surface protection, edge condition or documentation requirements. They are missing in the model and must come from the drawing.

Automatically adopted, each value comprehensible and accessible

In the fully automatic calculation from drawing and CAD, model and drawing are read out, and a draft calculation is created from it. There are fixed rules: each value bears its source, in the case of drawing information the page and the cut-out, in the case of geometry the model. Inconsistency readings remain visible as a conflict and are not tacitly decided. Unknown values remain unknown and appear as an open question instead of being appreciated. Proposals are only valid if you explicitly accept them; only your approval makes an offer out of the draft.

The fully automatic calculation is part of Pro. Pro and will be activated on request; the price will be indicated on request. The content of the design and limits describes the page Full automatic calculation from drawing and CAD. The individual calculation steps such as stock, times and unit costs are free of charge and without an account in the app.

Simplified and native CAD data

Simplified CAD models remove holes, threads, radii or threads. For the calculation this changes the characteristic counting and the times: A missing bore does not cost any processing time in the model, but on the part already. A simplified model therefore always belongs together with the complete drawing in the request. A STL network describes the surface only with triangles; surface and volume can be estimated, exact bore diameters cannot be exact.

Native CAD data contains the complete model with design history, but can usually only be read in the creating system. The public web app does not process it directly; the 3D model is exported as STEP or STL, the 2D contour as DXF, and the drawing as PDF. The overview of the formats that contain what CAD file formats, which evaluates the app, shows the page supported file formats.

Purpose-actual comparison of CAD data and drawing

A target-actual comparison of CAD data checks whether model and drawing describe the same status and what has changed between two revisions. For the calculation, it is important which features are new, omitted or otherwise tolerated, because only these change times and costs. How a modified drawing is recalculated without rebuilding the entire offer, the application case Recalculate drawing revision describes.

Typical sources of error

Units and scale must be checked during import, especially for network formats and drawing scans. Revision levels must be clearly assigned, otherwise an older geometry will be combined with new requirements. Component designations need a unique identity to bring together offer, order, feedback and reference case.

For operation this means: For each direction, which formats are used, which fields are assigned as well as how errors are treated and who is responsible. Exports or interfaces from ERP, PPS, BDE and MES are eligible for order data. The takeover does not replace any decision: Production strategy, critical features, feasibility and price release remain technically responsible. The pages show how this looks like in the product. CAD and drawing analysis and Data import from ERP, BDE and MES.

Key points

Data transfer is explained in such a way that inputs, procedures, effects and limits in the CNC calculation remain comprehensible.

  • Include source: Each given item remains assigned to model, drawing or job and remains verifiable.
  • Revision is mandatory: Without a clear drawing level, a wrong offer quickly arises from a quick takeover.
  • Uncertain to make visible: Contradictory or illegible information should be marked, not tacitly taken over.

Questions and answers

The most important practical questions concerning data transfer and the classification into a reliable calculation.

What is the difference between CNC data transfer and DNC?

DNC transmits finished NC programs between computer and machine control. The data transfer in the calculation reads CAD model, drawing and request in order to bring material, dimensions, characteristics, quantities and dates into calculation and work schedule. CNC Kalkulator transmits nothing to machine controls.

Which data come from the CAD model and which ones from the drawing?

The model includes dimensions, volume, surface and geometrical features such as bores and pockets. Material, tolerances, fit, surface information, heat treatment and test instructions are on the drawing. Quantity, date and scope of services come from the request.

What happens when model and drawing contradict each other?

The contradiction remains visible as a conflict and is not tacitly resolved in favour of a source. Only a professional decision determines which value goes into the calculation.

Can I take over native CAD files?

The public web app does not directly process native CAD files. Export the model as STEP or STL and the drawing as PDF; the Supported File Formats page shows which formats are supported.

Check STEP file in the CNC Calculator app

Measures external dimensions, volume, rotating part, holes and pockets of a STEP file from the exact surface geometry.

Check STEP file for free in CNC Kalkulator with input and result
Calculate in the app

Free tools in your browser without sign-in

Questions about data transfer in your own calculation we will gladly clarify personally: Book free first interview.

Carlo D'Este
D'Este Solutions

Welcome to the CNC Calculator

We will be happy to help you with any questions regarding the app, pro or your calculation.

Questions? Call us!